200C Max。带烘干机盖的自动薄膜涂层机和140mm刮刀

200ºC最大。自动薄膜涂布机与烘干机盖和140mm博士刀片Tmax-JK-TMJ-200是CE认证现出的紧凑型胶带铸造涂布机，采用加热盖，用于生产一致厚度的薄膜。它具有独特的驱动系统，可以在所有类型的材料上生产平滑涂层。扁平真空夹头内置以将基板片保持在适当位置，这在制造薄涂层时特别有用。一台140毫米宽度可调千分尺涂抹器（刮刀）。具有数字温度控制器的加热盖可以在涂覆高达200°C后的干膜，温度精度为+/- 1°C。该设备可用于陶瓷胶带铸件和锂离子电池电极涂层的研究人员。

小辊辊电池电极连续涂布机

TMAX-TMJ-180C台式连续涂布机是一种用于实验室研究的小型辊对辊涂布机，它是由高精度涂布装置组装而成，适用于事业单位、大学和工厂的电池研究中试规模工作。

立式板缝涂布机

生产膜片涂布机

实验室薄膜流动涂布机无级变速涂布机

实验室无级变速紧凑型棒膜涂布机

电池生产缝隙挤出槽模具电极涂布机，用于连续涂层和间歇涂层

*可实现连续、间歇等多种形状的涂膜;*狭缝挤出涂布方法，涂布精度高，涂布一致性好;*基材张力控制，输送带稳定，配置纠偏装置;*热风烘箱，上下两面通风，干燥效果好;*PLC控制，触摸屏操作，使用方便;涂装设备尺寸及重量:尺寸L1800*W1050*H1300mm重量:约600KG安装脚轮脚安装环境要求1)机头环境温度25~30°C，其余10~40°C;2)机头相对湿度RH≤35%，负极相对湿度RH≤98%，其余≤98%;1)电源:3PH 380V, 50HZ，电压波动范围:+8%~ -8%;电源总功率10KW;2)压缩空气:经干燥、过滤和调压后:出口压力大于5.0kg/cm2; We will still provide preuium slot die coater for you! Function: No. Item Technical parameters Remark 1. Suitable for system Ternary, lithium iron phosphate, lithium cobalt acid, lithium manganese acid, graphite, silicon carbon and other systems of battery positive and negative plate coating process 2. Coating method Continuous coating, intermittent coating Slit extrusion coating method 3. Oven section number 1 section 0.8m oven 4. Coating speed 0 ~ 0.5 m/min It depends on the drying condition 5. Operating substrate thickness Aluminum foil (Al) : 8 ~ 30um copper foil (Cu) : 6 ~ 30um 6. Design width of roll surface 300 mm 7. Ensure the width of the coating Less than 240 mm 8. Home roll Φ150mm 9. Precision coating ±1.5um 10. Suitable for paste viscosity 2000~12000 (mPas) 11. Single-side dry coating thickness range 10-250μm 12. The solvent properties Oily solvent NMP (s.g = 1.033, p. = 204 ℃) Aqueous solvent H2O/NMP (s.g = 1.000, p. = 100 ℃) 13. Suitable for solid content range 20~85% 14. Coating dimensional accuracy (mm) L≤±1,W≤±0.4 L:length direction W:width direction 15. Front and back alignment accuracy (mm) L≤±1,W≤±0.4 Drying tunnel No. Item Technical parameters remark 1. Oven structure Double layer independent heating, up and down arrangement 2. Oven length 0.8 meters/section 3. texture · SUS304 stainless steel 4. temperature control Divided into normal operating temperature control, overtemperature monitoring alarm protection control, and cut off the main heating power supply; Each section is controlled completely independently 5. Heating Mode Electric heating, hot air circulation structure 6. Single section oven heating power 6KW 7. Temperature in oven Design Max150 ℃, single section inside the oven temperature plus or minus 2.5 ℃ or less 8. Blowing way Upper and lower air blower, upper and lower air chamber share heating body 9. Structure of the wind The air nozzle slot USES the special mold slot 10. Wind Turbine Control Contactor Control 11. Heating control Solid-state relay 12. The fan material SUS304 stainless steel 13. Solvent recovery system Optional Winding mechanism: the function is the same as winding, as follows: NO. Item Technical parameter Remark 1. Rectifying marching Install the outlet 2. Tension Automatic control of constant tension 3. Installation structure The steel frame shall be installed securely 4. Number of rewinding air expansion shaft 1 set One-armed winding 1. We supply machines with battery technology support. 2. We supply full set of lithium battery equipment for lab research, pilot scale research and production line. 1 Standard exported package: Internal anticollision protection, external export wooden box packaging. 2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way. 3 Responsible for the damage during the shipping process, will change the damage part for you for free.