紧凑型胶带铸造涂布机带/真空吸盘(8“Wx14”L)，薄膜涂抹器和可选100ºC烘干机盖

TMAX-TMH250是一款CE认证的带加热盖的紧凑型胶带铸造涂布机，设计用于生产一致厚度的薄膜。它有一个独特的驱动系统，可以在所有类型的材料上产生光滑的涂层。平板真空吸盘是内置的，以保持基板在适当的地方，这是特别有用的制作薄涂层。一个100毫米宽可调千分尺敷药器(医生刀片)。带数字温度控制器的加热盖，可干燥涂膜后的温度高达100℃，温度精度为+/-1℃。该设备可用于陶瓷胶带铸件和锂离子电池电极涂层的研究人员。

电池生产缝隙挤出槽模具电极涂布机，用于连续涂层和间歇涂层

*可实现连续、间歇等形状的涂覆;*狭缝挤出涂覆法，涂覆精度高，涂覆一致性好;*基材张力控制，输送带稳定，配置纠偏装置;*热风烘箱，上下双面风干，干燥效果好;*PLC控制，触摸屏操作，使用方便;安装环境要求1)机头环境温度为25~30℃，其余为10~40℃;2)机头相对湿度RH≤35%，负极RH≤98%，其余≤98%;1)电源:3PH 380V, 50HZ，电压波动范围:+8%~ -8%;电源总功率10KW;2)压缩空气:经过干燥、过滤、调压:出口压力大于5.0kg/cm2; We will still provide preuium slot die coater for you! Function: No. Item Technical parameters Remark 1. Suitable for system Ternary, lithium iron phosphate, lithium cobalt acid, lithium manganese acid, graphite, silicon carbon and other systems of battery positive and negative plate coating process 2. Coating method Continuous coating, intermittent coating Slit extrusion coating method 3. Oven section number 1 section 0.8m oven 4. Coating speed 0 ~ 0.5 m/min It depends on the drying condition 5. Operating substrate thickness Aluminum foil (Al) : 8 ~ 30um copper foil (Cu) : 6 ~ 30um 6. Design width of roll surface 300 mm 7. Ensure the width of the coating Less than 240 mm 8. Home roll Φ150mm 9. Precision coating ±1.5um 10. Suitable for paste viscosity 2000~12000 (mPas) 11. Single-side dry coating thickness range 10-250μm 12. The solvent properties Oily solvent NMP (s.g = 1.033, p. = 204 ℃) Aqueous solvent H2O/NMP (s.g = 1.000, p. = 100 ℃) 13. Suitable for solid content range 20~85% 14. Coating dimensional accuracy (mm) L≤±1,W≤±0.4 L:length direction W:width direction 15. Front and back alignment accuracy (mm) L≤±1,W≤±0.4 Drying tunnel No. Item Technical parameters remark 1. Oven structure Double layer independent heating, up and down arrangement 2. Oven length 0.8 meters/section 3. texture · SUS304 stainless steel 4. temperature control Divided into normal operating temperature control, overtemperature monitoring alarm protection control, and cut off the main heating power supply; Each section is controlled completely independently 5. Heating Mode Electric heating, hot air circulation structure 6. Single section oven heating power 6KW 7. Temperature in oven Design Max150 ℃, single section inside the oven temperature plus or minus 2.5 ℃ or less 8. Blowing way Upper and lower air blower, upper and lower air chamber share heating body 9. Structure of the wind The air nozzle slot USES the special mold slot 10. Wind Turbine Control Contactor Control 11. Heating control Solid-state relay 12. The fan material SUS304 stainless steel 13. Solvent recovery system Optional Winding mechanism: the function is the same as winding, as follows: NO. Item Technical parameter Remark 1. Rectifying marching Install the outlet 2. Tension Automatic control of constant tension 3. Installation structure The steel frame shall be installed securely 4. Number of rewinding air expansion shaft 1 set One-armed winding 1. We supply machines with battery technology support. 2. We supply full set of lithium battery equipment for lab research, pilot scale research and production line. 1 Standard exported package: Internal anticollision protection, external export wooden box packaging. 2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way. 3 Responsible for the damage during the shipping process, will change the damage part for you for free.

带真空夹头和可选加热功能的实验室自动薄膜涂布机

具有真空吸盘的紧凑型胶带铸造涂布机，可调节薄膜涂抹器和烘干机盖TMAX-TMH250是CE认证现出的紧凑型胶带铸造涂布机，采用加热盖，设计用于生产厚度一致的薄膜。它有一个独特的驱动系统，可以在所有类型的材料上产生光滑的涂层。平板真空吸盘是内置的，以保持基板在适当的地方，这是特别有用的制作薄涂层。一个100毫米宽可调千分尺敷药器(医生刀片)。带数字温度控制器的加热盖，可干燥涂膜后的温度高达100℃，温度精度为+/-1℃。该设备可用于陶瓷胶带铸件和锂离子电池电极涂层的研究人员。